Columbia Mold Pulling Winch
Application: Pulling molds out of elastomer in a casting process
Customer: Drilex International
Location: Tomball, TX
Hoist Model: Columbia WK17000-4A12-L-02 AC Electric Winch
Performance Based On 460 VAC / 3 Phase / 60 Hz:
Line Pull: 17,000 pounds on the first layer
Line Speed: 4.3 feet per minute on the first layer
Wire Rope Capacity: 80 feet x 3/8” diameter synthetic rope with latching hook
Why APPI: Drilex International manufacturers rotors and stators and other downhole components used in drilling and thru-tubing operations in oil & gas wells.
Joe Garnica, an engineer at Drilex, contacted us in need of a mold pulling winch to replace the hydraulic cylinder they were using to pull molds out of the elastomer in the core of a stator after it was cast. In addition to the cylinder not lining up properly with the mold at certain angles their hydraulic system had ongoing issues with leakage.
With the maximum line pull required to break the mold free anticipated at being 40,000 lbs. it was decided to use one of our Columbia WK17000 AC electric winches rigged with four parts of line. In situations where less line pull is required the rigging can be changed to use fewer parts of line. The maximum of 20 feet of pulling distance dictated the need for 80 feel of line on the drum to accommodate the 4-part rigging.
We worked with Joe to ensure his line pull and line capacity requirements were covered in all of his working situations. Although the line speed with four parts of line will be very slow, Joe said it would be of benefit to them as pulling the mold free is a critical step in their manufacturing process.
Please contact us if you would like more information about this mold pulling winch or any of our other products and services.
Allied Power Products, Inc. has specialized in providing winches, hoists, capstans and cranes to meet our customers’ specific application requirements for more than 30 years.